Configure and optimize campaigns with AI
After you connect an AI assistant, Claude doesn’t just read your data — it also runs the OneClick optimization layer: configuring CPA/ROAS/budget, turning optimizations on and off and even creating campaigns, all requested in natural language.
While the performance analysis article covers what Claude reads, this one covers what it does in the optimization for you. These are write actions: almost all of them change the real behavior of your campaigns in the account — the exception is marking a pending action as resolved, which only changes OneClick’s record.
Configure a campaign
Section titled “Configure a campaign”You set the optimization parameters in natural language and Claude applies them. The parameters you control are the same as in the dashboard (see How to Configure Campaigns):
- Optimization profile — the combination of Pause (Strict or Flexible) with Scaling (Accelerated or Conservative); the default is Flexible Pause + Conservative Scaling.
- Cost per conversion to pause — the CPA ceiling that protects the campaign.
- Product sale value — the basis for calculating ROAS/CPA in sales campaigns.
- Minimum ROAS — for profiles that optimize for return.
- Maximum daily budget — the ceiling up to which OneClick can scale.
Example: “Claude, configure the campaign [name] with Strict Pause and Accelerated Scaling, cost per conversion to pause of R$ 90 and maximum budget of R$ 300.”
Configure several campaigns at once
Section titled “Configure several campaigns at once”You don’t need to repeat the action campaign by campaign. Describe the criterion and Claude applies it in bulk — for example, by a tag in the name, by budget type (CBO/ABO) or with exceptions.
- “Claude, reconfigure all active campaigns with the tag [MX] in the name to a cost per conversion of R$ 5.75 and maximum budget of R$ 75.”
- “Claude, set all sales campaigns in this account to minimum ROAS 3 and maximum budget of R$ 100, except the ones with ‘CALENDLY’ in the name.”
- “Claude, use a maximum budget of R$ 500 for the CBO campaigns and R$ 250 for the ABO ones.”
The assistant processes each campaign independently and gives you back what worked and what failed — so you can fix only what is still pending.
Adjust a single parameter
Section titled “Adjust a single parameter”You don’t need to reconfigure everything to change just one thing.
- “Claude, change only the cost per conversion to pause of the campaign [name] to R$ 350.”
- “Claude, raise this campaign’s maximum budget to R$ 10 thousand per day.”
Set the ad account monthly spend limit
Section titled “Set the ad account monthly spend limit”Besides each campaign’s budget, you can also ask the assistant to adjust the monthly spend limit — the ceiling that applies to the entire ad account, not to a specific campaign.
- “Claude, set this account’s monthly spend limit to R$ 30 thousand.”
- “Claude, remove this account’s monthly limit — leave scaling unlimited.”
- “Claude, what is the monthly limit set on this account today?”
Adjust the account defaults: profile and name suffixes
Section titled “Adjust the account defaults: profile and name suffixes”You can also ask the assistant to change the ad account settings — the same ones as in the ad account settings in the dashboard:
-
Default optimization profile — the Pause (Strict or Flexible) and Scale (Accelerated or Conservative) that the account’s new campaigns already receive. You can change just one of the two.
-
Suffixes in campaign names — turn on or off the record of OneClick’s actions in the name of optimized campaigns (see the Suffix System).
-
“Claude, what is this account’s default optimization profile today?”
-
“Claude, change this account’s default to Strict Pause, keeping the scale as it is.”
-
“Claude, turn off the suffixes in this account’s campaign names.”
Turn on, reactivate and pause optimizations
Section titled “Turn on, reactivate and pause optimizations”- “Claude, turn on the optimization for the campaign [name].”
- “Claude, reactivate the paused optimizations on the campaigns with the tag [A34].”
- “Claude, turn off the optimization for the campaign [name] for now.”
Reuse the account standard
Section titled “Reuse the account standard”When you create a new campaign and want to stay consistent with the rest of the account, Claude can pull the values you already use in the other active optimizations and apply the same ones.
- “Claude, configure these new campaigns using the same standard as the other active optimizations in the account.”
- “Claude, what sale value do I usually use in this account? Apply it to the new campaigns.”
Ask for the ideal parameters based on the account history
Section titled “Ask for the ideal parameters based on the account history”Instead of guessing the cost per conversion or the cutoff ROAS, ask Claude to analyze the account history and recommend the values — it looks at the cost per conversion (and the ROAS) your ads already deliver and suggests a point that cuts the expensive ones without choking the ones that perform.
- “Claude, analyze this account’s cost per conversion history and suggest a cost per conversion to pause that cuts the expensive ones without pausing the ones that already convert.”
- “Claude, what minimum ROAS makes sense for this account based on the average return over the last 90 days?”
- “Claude, recommend a maximum budget per campaign that is consistent with this account’s monthly limit.”
Check that a parameter won’t hurt what already converts
Section titled “Check that a parameter won’t hurt what already converts”Before applying a cost per conversion (or ROAS) cutoff to campaigns that are already running, ask Claude to validate it against current performance: it checks whether the ceiling you have in mind would pause ads that are already converting — preventing a new configuration from killing your winners.
- “Claude, before applying it, check whether a cost per conversion to pause of R$ 150 would pause ads that already convert in campaigns [X] and [Y]. I don’t want to disrupt them.”
- “Claude, what is the lowest cost per conversion to pause I can use in this campaign without cutting the ad that carries its conversions?”
Create new campaigns
Section titled “Create new campaigns”Claude also creates campaigns for you: replicating one of your reference campaigns and filling it with your best ads, with a new creative sent by link (image or video) and with the copy you define — ideal for building the Validated Campaigns (formats such as 1-1-10, 1-4-5, 1-5-1, 1-6-3) without building anything by hand.
- “Claude, build an Andromeda Scale (1-1-10) with my 10 best ads from the last 90 days, R$ 100/day, and upload it paused so I can review it.”
- “Claude, create the campaign with this image [link] in every ad.”
The complete guide — structure, budget, choice of creatives and how to define the copy, with ready-made prompts — is in Creating new campaigns with AI.
Audit coverage and standardization of active campaigns
Section titled “Audit coverage and standardization of active campaigns”Two common maintenance cases: finding what is running in Ads Manager but outside OneClick’s control, and checking whether the optimized campaigns follow the same standard.
- “Claude, list the active campaigns in Ads Manager for this account that are not yet optimized in OneClick.”
- “Claude, of those, configure the conversion ones with the account standard.”
- “Claude, is there any active campaign spending without being under OneClick?”
- “Claude, check whether all active campaigns (except the tracking ones) are on the same profile and the same cost per conversion, and show me the ones that deviate from the standard.”
- “Claude, align the ones that are off to Strict Pause with Accelerated Scaling, cost per conversion of R$ 150 and maximum budget of R$ 500.”
Follow the automation’s decisions
Section titled “Follow the automation’s decisions”Operating with AI also means transparency and control: at any moment you can ask what the OneClick optimization did for your campaigns and why — so you can take the next steps with peace of mind.
- “Claude, what did OneClick do today in the campaign [name]?”
- “Claude, show me the optimization’s action history for the campaign [name] over the last 24 hours.”
- “Claude, is this campaign scaling or stabilized right now? What explains that?”
- “Claude, has the campaign [name] already reached the maximum daily budget I configured?”
- “Claude, which structures did the optimization pause or scale recently, and based on which metric?”
See what changed outside the optimization
Section titled “See what changed outside the optimization”The optimization’s action history only shows what OneClick did. To also find out what was changed by hand (by you or someone on your team) or by Meta itself in an account, campaign, ad set or ad, ask for the change history — it shows what changed, the before and after (budgets and bids already in the account currency) and who made the change. Changes made by OneClick itself don’t appear here, so the history above is not duplicated. You can look back up to 90 days, and the campaign doesn’t need an active optimization.
- “Claude, what was changed manually in the campaign [name] over the last 7 days?”
- “Claude, did this campaign’s budget change? Who changed it, and from what to what?”
- “Claude, did Meta change anything in this account this week?”
Keep the status marker in the name
Section titled “Keep the status marker in the name”An active optimization shows up in the campaign name with the marker 🤖 [OneClick ON] (and 🤖 [OneClick OFF] when it is turned off). This text is customizable — see Customizing the Optimization Tag. If it gets lost in a manual edit of the name, ask the AI to restore it:
- “Claude, reapply the 🤖 [OneClick ON] marker to the campaigns that have an active optimization and are active in Meta.”
- “Claude, which active campaigns have the optimization on but no status marker in the name? Fix them while keeping the rest of the name.”
Let OneClick know you resolved a pending action
Section titled “Let OneClick know you resolved a pending action”When Meta requires an action from you to unblock an optimization — accepting terms of use, replacing a removed ad asset, sorting out a payment —, OneClick Ads stops trying that change and lists the pending action (see what is blocking the optimizations right now). It only removes it from the list when it notices on its own that the block is gone, which may take until the next time the optimization tries that action.
If you have already resolved it on Meta’s side and don’t want to wait, just say so:
- “Claude, I’ve already accepted the page’s registration terms. Mark that pending action as resolved.”
- “Claude, I sorted out the account’s payment and reconnected Meta. Mark both pending actions as resolved.”
- “Claude, list what is pending and mark as resolved everything I’ve already fixed.”
Claude marks as many pending actions as you indicate at once, and from then on OneClick goes back to trying the changes that were on hold. One by one, you can also do this in the dashboard, under Pending actions — see Ad account access and status.
Stop the reminders for a pending action you won’t resolve now
Section titled “Stop the reminders for a pending action you won’t resolve now”If a pending action can’t (or isn’t worth it to) be resolved now, you can tell Claude that you are aware of it. The daily reminders for that pending action stop, but it remains active and keeps blocking the same changes — nothing starts working again because of it.
- “Claude, I’m aware of the pending action for the page [name]. Stop reminding me about it.”
- “Claude, start notifying me about that pending action again.”
Don’t confuse this with marking it as resolved: resolved says “I fixed it” and makes OneClick try again; aware says “I know, and I’ll live with it for now”.
Best practices when operating through AI
Section titled “Best practices when operating through AI”- Start by reading, operate later. Validate the data with analysis questions before asking for changes.
- Ask for confirmation in bulk. Before applying to many campaigns, ask for a summary of what will be changed.
- Prefer ‘paused’ when creating. Review in Ads Manager before turning it on.
- Describe by name. You never need IDs — a name, tag or criterion is enough.